{"id":77,"date":"2004-10-15T14:38:49","date_gmt":"2004-10-15T18:38:49","guid":{"rendered":"https:\/\/www.bumc.bu.edu\/ppb\/resources\/problem-3\/"},"modified":"2022-05-07T19:28:32","modified_gmt":"2022-05-07T23:28:32","slug":"problem-3","status":"publish","type":"page","link":"https:\/\/www.bumc.bu.edu\/ppb\/education\/pharmacology\/problem-sets\/problem-3\/","title":{"rendered":"Programmed Problem Set on General Anesthetics"},"content":{"rendered":"<p>Edward W. Pelikan, M.D.<br \/>\nProfessor Emeritus and Former Chairman of Pharmacology<br \/>\nBoston University School of Medicine<\/p>\n<p><em>Questions or comments should be mailed to <a href=\"mailto:ctwalsh@bu.edu\">Carol Walsh<\/a><\/em><\/p>\n<p><a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/problem-sets\/\">Return to Pharmacology Problem Sets<\/a><\/p>\n<p>This is a program about anesthetic agents and their properties. It is also concerned with a class of agents capable of producing central nervous system depression, but not used clinically as anesthetics (See <em>Arch. Ind. Hyg.<\/em>, 2: 335 and 345, 1950). You will be asked to predict the biologic properties of these agents and compare them with the properties of recognized anesthetic agents. You will also have the opportunity to compare the properties of the anesthetic agents.<\/p>\n<p>&#8220;Freon&#8221; is the trademark, or proprietary name, for a class of fluorocarbons that are chemically stable under conditions that occur in the body. Central nervous system depression is a prominent acute effect of those Freons that have biologic effects. Freons are used as heat exchange fluids in refrigeration and air-conditioning systems; some, the more volatile ones, have been used as aerosol propellants. Medical interest in Freons arises from their effects as odorless atmospheric pollutants in industry, homes, etc.; their lack of odor makes it difficult to detect them easily in the ambient air. Scientific interest in freons relates to their contributing to ozone depletion in the stratosphere.<\/p>\n<p>In the table below, selected properties of three Freons are compared with those of three inhalation anesthetics.<\/p>\n<p>You may wish to bear in mind that for materials with chemical and biologic properties like those of diethyl ether, the ratio of the atmospheric partial pressure of the material required for production of anesthesia to the vapor pressure of the pure material is constant: Pa\/Ps=K. For anesthetic materials, in general, an average value of K of 0.05 can be assumed, when Ps is measured at 20\u00b0C. At 20\u00b0C, the corresponding proportionality constant for lethal effect is 0.12.<\/p>\n<table>\n<tbody>\n<tr>\n<th>Agent<\/th>\n<th>Formula<\/th>\n<th>Molecular Weight<\/th>\n<th>Boiling Point (\u00b0C)<\/th>\n<th>Vapor Pressure (mmHg @ 20\u00b0C)<\/th>\n<th>Vapor Density (Air=1)<\/th>\n<th>Relative Water\/Gas Solubility Coefficient*<\/th>\n<\/tr>\n<tr>\n<td>MF<\/td>\n<td>CCl3F<\/td>\n<td>137<\/td>\n<td>24<\/td>\n<td>674<\/td>\n<td>4.8<\/td>\n<td>0.02<\/td>\n<\/tr>\n<tr>\n<td>TF<\/td>\n<td>CCl2F\u20acCClF2<\/td>\n<td>187<\/td>\n<td>48<\/td>\n<td>268<\/td>\n<td>6.2<\/td>\n<td>0.003<\/td>\n<\/tr>\n<tr>\n<td>BF<\/td>\n<td>CCl2F\u20acCClF<\/td>\n<td>204<\/td>\n<td>93<\/td>\n<td>1<\/td>\n<td>5.8<\/td>\n<td>0.002<\/td>\n<\/tr>\n<tr>\n<td>Ether<\/td>\n<td>(C2H5)2O<\/td>\n<td>74<\/td>\n<td>35<\/td>\n<td>440<\/td>\n<td>2.6<\/td>\n<td>1.000<\/td>\n<\/tr>\n<tr>\n<td>Nitrous Oxide<\/td>\n<td>N2O<\/td>\n<td>44<\/td>\n<td>-89<\/td>\n<td>38,800<\/td>\n<td>1.5<\/td>\n<td>0.04<\/td>\n<\/tr>\n<tr>\n<td>Cyclopropane<\/td>\n<td>C3H6<\/td>\n<td>42<\/td>\n<td>-33<\/td>\n<td>4,800<\/td>\n<td>1.5<\/td>\n<td>0.02<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>*Ether = 1.0; values are proportional to the blood\/gas solubility coefficient<\/p>\n<p>I. Concerning the conditions for storage and administration of MF, TF and BF as experimental anesthetic agents, we would expect that:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. BF would be stored under pressure in steel tanks, as is true for cyclopropane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Incorrect: The high boiling point of BF shows that it would not be a gas at standard temperature and pressure; hence, unlike cyclopropane, which is, BF would not be stored under pressure in steel tanks. As a matter of fact, BF has a melting point of 25\u00b0C. Needless to say, the same reasoning would apply to consideration of BF in comparison to nitrous oxide, the other anesthetic gas.<\/p>\n<p>Go back to Item I and select another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. MF and TF could probably be stored under conditions appropriate for diethyl ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good; MF and TF have boiling points a little higher than room temperature as diethyl ether does and, therefore, all three could be stored under similar conditions: in tightly closed containers but at ambient atmospheric pressure.<\/p>\n<p>Go on to Item II.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. MF, like ether, could not be given by the 'open-drop' method, with the patient supine, a gauze and wire mask over his\/her mouth and nose, and drug poured, dropwise, onto the mask<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, MF would volatilize nicely \u2013 possibly too nicely \u2013 under conditions of the \u201copen-drop\u201d method, since its boiling point is just a bit above room temperature ; MF also has a vapor density greater than that of air and MF vapors would \u201cfall\u201d nicely through the mask used in the open-drop technique. And, of course, ether was administered by this technique with good success clinically, for many years.<\/p>\n<p>Go back and select another choice from Item I.<\/p>\n<p><\/div>\n<\/div>\n\n<p>II. One can envision a model of central nervous system function which states that the probability that information is transmitted through a chain of neurones is a function of the probability with which any and every neurone in the chain will respond to a stimulus. Such a &#8220;probabilistic model&#8221; of CNS function can be used to explain any selectivity of action these agents may manifest:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Only if the agents act by forming ionic bonds with constituents of cell membranes<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Incorrect: The probabilistic model explains selectivity in terms of the \u201cmultiplication\u201d of effects in neurone chains of various lengths, regardless of the mechanism by which the function of the individual neurone is impaired. Sorry, go back to Item II and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Only if the agents act by dissolving into cell membrane lipids<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, the probabilistic model explains selectivity of action in terms of the probability that information will get through a neurone chain, regardless of the cellular mechanism by which the function of individual neurones might be altered.<\/p>\n<p>Go back to Item II and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Regardless of whether the agents act by forming ionic bonds, or by dissolving into cell lipids<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Of course, the probabilistic model explains selectivity of action on the CNS of such agents as these in terms of a \u201cmultiplication\u201d of effects on information transmission in chains of differing numbers of serially arranged neurones. Selectivity of such agents for the central nervous system is explained in terms of a lesser sensitivity to the drug of such tissues as have their functional cells not arranged in serial order; in such tissues the effect of drugs on the function of the tissue represents the sum of the effects on individual cells. In any event, the probabilistic model explains selectivity of action in terms of what happens to the function of a group of cells after the function of individual cells has been altered, and, hence, without regard to the cellular mechanism of action of the drug. (See Intern. Anesth. Clinics 2:3, 1963).<\/p>\n<p>Go on to Item III.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. If the agents act by combining preferentially with receptors in neurones found predominantly in short neurone chains, and diminish the functional capacity of the neurones<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Stop! There are several things wrong about this choice. Non-polar compounds such as these give no evidence of acting on receptors as they\u2019re usually defined. The probabilistic model suggests that the general effect of such agents as these is greatest on the longest neurone chains. The probabilistic model describes what happens to transmission of information through neurone chains after the function of individual cells has been altered, and, hence, is not concerned with the cellular mechanism by which the change was brought about.<\/p>\n<p>Go back to Item II and select another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<p>III. <strong>This question has been omitted. Go on to Question IV.<\/strong><\/p>\n<p>IV. If concentration of agent required to provide anesthesia were expressed as volumes percent, one would expect that:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. MF would be more potent than ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry. Pa=PsK; the partial pressure for anesthesia is proportional to the vapor pressure of the material. Concentration in volumes percent is directly proportional to the partial pressure (Pa) of gas required to produce anesthesia; VOL% = Pa\/760 mmHg. Potency, therefore, is inversely related to partial pressure for anesthesia as potency is always inversely related to dose. Therefore MF should be less potent than ether. Go back to Item IV and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. MF would be more potent than cyclopropane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good; not many students make this their first choice, by the way. You\u2019ve recognized that at equilibrium Pa=PsK, and that potency, by definition, is inversely related to dose, or Pa, in this case. You need not have known the Pa for cyclopropane exactly; you may have known only that it\u2019s a gas at standard temperature and pressure and hence has a higher vapor pressure than 760 mmHg at 20\u00b0C. Hence it\u2019s more volatile and less potent than MF.<\/p>\n<p>You know already, I\u2019m sure, that concentration, expressed as volumes percent, is directly proportional to the partial pressure (P) of the gas in the gas-mixture. In fact, VOL% = P\/760mmHg, or torr, at standard pressure.<\/p>\n<p>The relationship Pa=PsK is, of course, a way of writing Raoult\u2019s Law \u2013 or Henry\u2019s Law, for that matter \u2013 in which K represents the mole fraction of anesthetic agent in solution. It can be read in this way, remembering that K is essentially the same for all anesthetic gases and vapors: at equilibrium, when the concentration of anesthetic material to which an organism is exposed is sufficient to produce anesthesia, the concentration relative to the vapor pressure of the material has a constant value, regardless of the agent. According to the ideas of Ferguson, when a certain fraction of, e.g., a cell is occupied by anesthetic agent, anesthesia is produced; this fraction (mole fraction) is the same for all inert, volatile materials used as anesthetics, expressed as a fraction of the vapor pressure of the pure agent.<\/p>\n<p>Now go to Item V.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. BF would be less potent than MF or ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, wrong choice. If the partial pressure of material in the inspired air required to produce anesthesia is proportional to the vapor pressure of the material (and it is; generally, Pa = PsK) and potency is inversely related to partial pressure for anesthesia or dose (as by definition it is), then BF should be more potent than either MF or ether. In Item I, by the way, it came out that BF might require some special treatment to volatilize it, but that\u2019s another question.<\/p>\n<p>Go back to Item IV and choose again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. None of the above<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, one of the other choices is correct. I assume you\u2019re using the known relation between vapor pressure and partial pressure to produce anesthesia in analyzing this item and that you aren\u2019t confusing \u201cpotency\u201d and \u201cdose\u201c.<\/p>\n<p>Go back to Item IV and try to analyze the data again, and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<p>V. If TF were used to induce anesthesia in a subject who had a fever, for whatever cause, and a body temperature of 40\u00b0, how would the subject&#8217;s hyperpyrexia influence the apparent potency of the agent (in comparison to its potency in a subject with a normal body temperature)?<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. TF would appear to be less potent in the hyperpyrexic subject<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>You\u2019re right. Pa=PsK. At the higher temperature the vapor pressure of TF would be higher than at normal body temperature (37\u00b0), the partial pressure for anesthesia would be higher, and the potency would be lower in the hyperpyrexic patient. And it works out that way; See Anesthesiol 26: 764, 1965 and papers since then such as Fed. Proc. 33: 495 (#1605) 1974. You can now probably predict correctly the effect of hypothermia on anesthetic dose. Another thing that works out all right, as you may have noticed, is the fact of Pa=PsK, even though Ps may be given at 20\u00b0C instead of at 37\u00b0C, the temperature at which the pharmacologic action of general anesthetics and similar materials occurs. Needless to say the results turn out \u201cbetter\u201d when the vapor pressure and partial pressure are determined at the same temperature.<\/p>\n<p>Go on Item VI.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. TF would appear to be more potent in the hyperpyrexic subject<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry. Will it help if I suggest that vapor pressure of a material like TF changes with temperature, specifically increases with temperature?<\/p>\n<p>Go back to Item V and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. TF would appear to be equally potent in the hyperpyrexic and normal subjects<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Wrong choice, I fear. May I suggest that you consider again that Pa=PsK and that Ps changes with temperature and reaches a maximum of 760 mmHg at the boiling point of the material?<\/p>\n<p>Go back to Item V and choose again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Known properties of general anesthetic agents don't permit predicting their effects under these conditions<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry; this is just another way of considering the relationship between vapor pressure for materials like TF, and the concentration of the material required to be inhaled to produce anesthesia. This one is rather like Item IV.<\/p>\n<p>Go back to Item V and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<p>VI. With identical partial pressures in the inspired air, and identical alveolar-blood partial pressure differences, one would expect that diffusion of gas (or vapor) through the alveolar membrane would be more rapid for:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. BF than MF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry; diffusion constant is inversely related to the square root of molecular weight \u2013 and the square root of vapor density, too, according to Graham\u2019s Law. If the driving force of partial pressure differences and the area through which diffusion occurs are the same for BF and MF, then\u2026<\/p>\n<p>Go back to Item VI and select another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. MF than ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>I\u2019m afraid not. Diffusion constant is inversely proportional to the square root of molecular weight \u2013 over a wide range of weights \u2013 and inversely related to the square root of vapor density. ( You can almost see heavy molecules moving sluggishly). Therefore, with equal concentration differences and equal areas for diffusion, the diffusion rates of MF and ether should be in the proportion of\u2026<\/p>\n<p>Go back to item VI and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. BF than ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Too bad; you may have forgotten that the square roots of both molecular weight and vapor density are inversely related to the diffusion constant, and that diffusion rate will vary with diffusion constant, concentration difference, and area through which diffusion occurs. If the last two are viewed as the same for BF and ether (one lung\u2019s worth of area!) then it follows that\u2026.<\/p>\n<p>Go back to Item VI and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Oxygen (O2) than ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Good. The diffusion constant for a molecule is inversely related to the square root of its molecular weight \u2013 over a wide range of weights \u2013 and O2 certainly has a lower molecular weight (32) than does ether. Given equal partial pressure differences and equal areas for diffusion (one lung\u2019s worth) diffusion of molecular oxygen will be more rapid than diffusion of ether.<\/p>\n<p>You\u2019ll remember, of course, that for normal subjects with normal lungs, diffusion of drug across the alveolar membrane is not the rate limiting factor in induction of anesthesia. What is?<\/p>\n<p>TF wasn\u2019t included in any of the choices for this item. You\u2019ll observe that the implied direct proportionality between molecular weight and vapor density \u2013 seen nicely in the case of MF, BF and ether \u2013 doesn\u2019t hold true if TF is included in the series. Maybe the differences in vapor density of TF and BF couldn\u2019t be discriminated well with the method used to get the data reported here; certainly their molecular weights indicate that their densities should be close together. Maybe our generalization is too general for the case of agents with such similar weights. Go on to Item VII.<\/p>\n<p><\/div>\n<\/div>\n\n<p>VII. At equally effective concentrations, one would expect anesthesia to be induced more rapidly with:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. BF than with ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good; you\u2019ve remembered that the rate limiting factor in induction of anesthesia with volatile and gaseous agents is the blood\/gas solubilities of the agents. Other things \u2013 such as concentration \u2013 being equal, rate of onset of anesthesia is inversely related to the relative solubility of drug in blood. The greater the solubility of the anesthetic agent, the longer it takes to saturate this reservoir, and the longer it takes for drug to \u201cspill-over\u201d from blood in to the tissues where the agent has its desired \u2013 and, perhaps, some undesired \u2013 effect. BF has a lower solubility in water (blood) than does ether; hence the onset of anesthesia would be more rapid with BF than with ether.<\/p>\n<p>Go on to Item VIII<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Ether than with MF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry; you may well have remembered that rate onset of anesthesia is determined by the blood\/gas solubility coefficient, but you\u2019ve misremembered the relationship.<\/p>\n<p>Go back to Item VII and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Ether than with TF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>I\u2019m afraid not; other things being equal, rate of onset of anesthesia is related inversely to the solubility of the anesthetic agent in the blood. The blood acts as a \u201cbuffer\u201d between the concentration of agent in the alveolus and its concentration in the tissues. Therefore, in the case of ether and TF\u2026<\/p>\n<p>Go back to Item VII and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. MF than with TF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Too bad; you\u2019ll have to try again. The rate limiting factor in onset of anesthesia with materials that act as general anesthetics do is the solubility of the agent in the blood. You\u2019ll probably remember now that rate of onset of anesthesia and relative solubility in the blood are related inversely to each other.<\/p>\n<p>Go back to Item VII and make a different choice.<\/p>\n<p><\/div>\n<\/div>\n\n<p>VIII. After anesthesia sufficiently prolonged to saturate all tissues, recovery would be expected to be slower with:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. BF than with ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry; under the conditions described, recovery from anesthesia proceeds rapidly to the extent that agent readily passes out of the tissues, through the blood (as it were), and into the pulmonary alveoli, preparatory to exhalation. If the agent is relatively soluble in the blood, the blood \u201creservoir\u201d is not readily emptied, the concentration difference between tissues and blood remains small, and agent leaves the tissues slowly, i.e., the anesthetic state is prolonged. Therefore, after comparing the solubilities of BF and ether, we\u2019d conclude that\u2026<\/p>\n<p>Go back to Item VIII and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Ether than with nitrous oxide or cyclopropane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good, this is the correct answer. Back to reality or at least to real, clinically useful anesthetic agents. The rate at which recovery would occur depends on the rate that drug will pass from tissues to blood to the pulmonary alveoli, and to the exterior of the body, in that order. To the extent that an agent is soluble in blood (or, roughly speaking, water) the reservoir of the blood is not readily emptied, the concentration difference between tissues and blood is small, agent leaves the tissues slowly, and anesthesia is prolonged. Since ether is more soluble in water or blood than are either nitrous oxide or cyclopropane, under the conditions given, recovery would be slower with ether than with either of the other two.<\/p>\n<p>The most important point, perhaps, is that you don\u2019t have to remember isolated facts such as the solubilities of nitrous oxide and cyclopropane. You know that cyclopropane and nitrous oxide are gases at standard temperature and pressure, i.e., they have high vapor pressures at room temperature. According to Raoult\u2019s Law, the solubility of an inert gas, in dilute solutions, is inversely proportional to the vapor pressure of the liquid solute at the given temperature. Raoult\u2019s Law applies perfectly only to ideal dilute solutions, but it applies well enough to anesthetic materials under conditions of use to permit the generalization that the clinically useful anesthetic gases are less soluble in blood and water than the clinically useful anesthetic vapors and rates of induction and recovery from anesthesia for these two groups vary accordingly. Among the vapors and among the gases, respectively, Raoult\u2019s Law, as given, is not a sure predictor of solubility.<\/p>\n<p>Raoult\u2019s Law has come up before in Item IV, when we were concerned with anesthetic potency. This law or relationship among partial pressure, vapor pressure, and solubility (mole fraction of solute in solution) applies to questions of potency when we\u2019re concerned with solution of agent in a target cell, and applies to questions of rate on onset and waning of anesthesia when we\u2019re concerned with solution of agent in blood, the medium which transports agent to the target cell. Disregard all other factors for the moment, including the fact that anesthetic agents can\u2019t act as perfect gases under conditions of use; still, it\u2019s no coincidence that the three agents once used clinically which are gases at STP (cyclopropane, ethylene and nitrous oxide) were of low potency, more rapid onset, and shorter duration of action than the volatile agents were.<\/p>\n<p>Now, of course, only nitrous oxide is used clinically.<\/p>\n<p>That was a long one. Why don\u2019t you go on now to Item IX?<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. TF than with ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, you\u2019ll have to make another choice. Under the conditions described, rate of recovery, like rate of induction, is related to the water\/gas or blood\/gas solubility coefficients of the agent. TF is less soluble in water than ether, and recovery from anesthesia with TF would be more rapid than recovery from ether anesthesia.<\/p>\n<p>Go back to Item VIII and choose again.<\/p>\n<p><\/div>\n<\/div>\n\n<p>IX. During the induction and maintenance of experimental anesthesia with the several agents, &#8220;moment-to-moment control&#8221; of the depth of anesthesia would be greatest with:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. MF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, wrong choice. \u201cMoment-to-moment control\u201d is just another way of talking about rapidity with which the depth of anesthesia can be changed.<\/p>\n<p>I think you\u2019d best go all the way back to Item VII.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. TF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Too bad. Since \u201cmoment-to-moment\u201d control is a reflection of the rate at which depth of anesthesia can be increased or decreased, I suggest that you\u2019d do well to go back to Item VII.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. BF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good. You\u2019re aware that \u201cmoment-to moment\u201d control is simply a reflection of the rate at which depth of anesthesia can be increased or decreased by changing the concentration of anesthetic agent in the inspired air. Moment-to-moment control is a miniature of induction and recovery from anesthesia. The old rules apply and since, of all the agent in the table, BF has the lowest water\/gas solubility coefficient, moment-to-moment control would be greatest with BF.<\/p>\n<p>Go on to Item X.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, moment-to-moment control would be least with ether. Since moment-to-moment control is so much related to problems of rate in induction and recovery from anesthesia, I suggest you go back to Item IX.<\/p>\n<p><\/div>\n<\/div>\n\n<p>X. One can determine experimentally the duration of the exposure to a given concentration of gas or vapor that is required to produce a specified biological effect: anesthesia, for example, in the case of MF, BF, TF or ether. One can repeat the experiment using different concentrations of the agent under investigation. If one plots concentration (on the ordinate) against duration of exposure or latent period (on the abscissa), one obtains a curve convex with respect to the origin, and approximating an hyperbola. For each of such series of points on a true hyperbola, the product of concentration and time would be constant: CT=K. K, for a given agent, computed from experimental data, is called the &#8220;<a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#CTIndex\">CT Index<\/a>&#8221; of the agent and is a measure of its <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#Potency\">potency<\/a>. CT indices have wide application in toxicology, industrial hygiene, air pollution studies, experimental pharmacology, etc., as a means of comparing biologically active materials.<\/p>\n<p>The plot of concentration against time frequently departs from the theoretical hyperbolic form unless one corrects for: 1) The fact that with even the highest concentrations of an agent, a finite time is required for effects to be produced and observed, and 2) the fact that, at concentrations at or below a certain minimum &#8211; the &#8220;threshold concentration&#8221;, by definition &#8211; no biological effects will be observed after an exposure of even theoretically infinite duration. In much practical work, such niceties can be disregarded and the CT index can be computed &#8211; and used &#8211; without actually making such corrections.<\/p>\n<p>For the agents in the table, assuming their <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#Latency\">concentration-latency<\/a> curves are parallel, the CT index would probably be:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Larger for ether than for MF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, you\u2019ve made an incorrect choice. The less potent an agent is, the greater the concentration required to produce a given effect, i.e., the greater the partial pressure required to produce anesthesia (Pa). Pa is proportional to vapor pressure. Therefore, the greater the vapor pressure, the larger the <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#CTIndex\">CT Index<\/a>, when concentrations are determined for equal times of exposure and the <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#Latency\">concentration-latency<\/a> curves are parallel. Maybe it would help to sketch the curves involved here.<\/p>\n<p>Go back to Item X and choose again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Larger for MF than for ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good, you\u2019ve made the correct choice. The dose of agent required to produce anesthesia, for these agents, is proportional to the vapor pressure, of course; you\u2019ve undoubtedly referred, in your thinking, to the relationship Pa=PsK discussed in Item IV. Since the <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#Latency\">concentration-latency<\/a> curves of MF and ether are parallel, by the terms of our problem, at any and all durations of exposure, the Pa, or C, for MF is greater than that for ether, and the CT for MF is greater than the CT for ether for any exposure time, T.<\/p>\n<p>Go on to Item XI, now.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Larger for BF than for MF or TF<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, wrong choice. Perhaps you\u2019d better review Question IV to refresh your memory about the relationships among Pa, Ps and measured <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#Potency\">potency<\/a>. In analyzing the data for Item X, remember that we\u2019ve established that the <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#Latency\">concentration-latency<\/a> curves for BF, TF, and MF are parallel. Maybe it would help to draw sketch-graphs of the curves for the agents.<\/p>\n<p>Go back and make another choice in Item X.<\/p>\n<p><\/div>\n<\/div>\n\n<p>XI. In analogy with known anesthetic agents, contact of MF, TF, and BF with hot metal surfaces &#8211; as might occur during an industrial or hospital accident &#8211; might be expected to result in:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Flame and possible explosion, as would occur with halothane or chloroform<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, saturated hydrocarbons that are extensively halogenated, such as halothane, chloroform, and Freons, are generally not flammable.<\/p>\n<p>Go back to Item XI and choose again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Flame and possible explosion, as would occur with ether or cyclopropane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, saturated hydrocarbons that are extensively halogenated \u2013 as the Freons are, and as halothane and chloroform are \u2013 are generally not flammable. Of course, ether and cyclopropane are highly flammable. Go back and make another choice from Item XI.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Oxidation of the surface without explosion hazard, as would occur with cyclopropane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Too bad, wrong choice. Perhaps you\u2019re confusing the properties of cyclopropane, which is not an oxidizing agent but is eminently flammable, with those of nitrous oxide, which is not flammable but is an oxidizing agent. Freons, by the way, aren\u2019t oxidizing agents.<\/p>\n<p>Make another choice in Item XI.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Production of toxic products such as phosgene, as would occur with chloroform or trichloroethylene<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Good, this is the correct choice, reasoning by analogy. One of the hazards in the use of chloroform and trichloroethylene \u2013 particularly in industry, where they are used as solvents and degreasing agents \u2013 is the formation of phosgene from the agents in the presence of heat. Carbon tetrachloride is guilty of having the same property; it may no longer be used in fire-extinguishers; too many victims avoided injury or death from fire, but succumbed later to the effects of phosgene, which produces pulmonary edema \u2013 and a succession of consequent effects \u2013 by virtue of its properties as a pulmonary irritant.<\/p>\n<p>Go on to Item XII and remember phosgene; anesthesiology and industrial hygiene have more in common than the <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#CTIndex\">CT Index<\/a>!<\/p>\n<p><\/div>\n<\/div>\n\n<p>XII. In analogy with known anesthetic agents, adverse effects of MF, TF, and BF that might be anticipated during experimental anesthesia would include:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Abrupt, severe hypertension during surgical anesthesia, as is characteristic of halothane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Stop! Whatever the Freons might do, occurrence of hypertension during surgical anesthesia is not characteristic of halothane. Review the cardiovascular effects of anesthetics with the aid of your text, go back to Item XII, and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Cardiac arrhythmias, as is more characteristic of enflurane and isoflurane than of halothane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry. Whatever the Freons might do, enflurane and isoflurane don\u2019t characteristically induce cardiac arrhythmias more frequently than does halothane. You\u2019d do well to review the cardiac effect of anesthetic agents as given in the textbook before going back to Item XII and making another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. 'Sensitization' of the myocardium to arrhythmias produced by epinephrine, as is characteristic of halothane and chloroform<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good, you\u2019ve chosen correctly. Not only do halothane and chloroform \u201csensitize\u201d the heart to epinephrine-induced arrhythmias, the Freons do it too. One of the hazards of inhaling aerosol propellants to achieve euphoria (probably more appropriately called self-induced Stage I anesthesia, when we discuss it) is sudden death not unlikely caused by cardiac arrhythmia, which itself might be caused by the halogenated hydrocarbon propellant, such as a Freon. See, for example, JAMA 214: 81, 1970; JAMA 219: 33, 1972, and Arch. Environ. Health 22: 265, 1971. By the way, what drug(s) should prevent occurrence of the arrhythmias we\u2019re talking about?<\/p>\n<p>Early in the history of chloroform anesthesia, sudden death occurring during induction was not just a tragic technical, professional problem; the knowledge that such deaths occurred worked against public acceptance of general anesthesia as a desirable medical procedure.<\/p>\n<p>Now go on to Item XIII.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. 'Sensitization' of the myocardium to arrhythmias produced by epinephrine, as is characteristic of nitrous oxide<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Too bad. Whatever the effects of the Freons on the heart, cardiac arryhythmias and sensitization of the heart to epinephrine are not characteristic of anesthesia with nitrous oxide. Why don\u2019t you refresh your memory concerning the cardiac effects of anesthetic agents by referring to your text. Then go back to Item XII and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<p>XIII. Conditions which might predispose a patient to the occurrence of ventricular arrhythmias during clinical general anesthesia include:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Facilitated AV conduction, caused by a direct action of the anesthetic agent<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, wrong choice. It is hard to see why facilitated AV conduction could predispose to occurrence of ventricular arrhythmias, and, in any case, the direct effect of general anesthetic agents is to slow or impair AV conduction. One might have expected that, perhaps, knowing the effect of anesthetic agents on cell functions generally. You might review this matter as it is presented in your text, even in your textbook of physiology!<\/p>\n<p>Now go back to Item XIII and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Shortened atrial refractory period, caused by a direct action of the agent<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Incorrect: The direct effect of the agent would be, I think, to prolong the atrial refractory period and (or while) increasing the threshold of the atrial muscle to stimuli.<\/p>\n<p>Please go back to Item XIII and choose again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Increase of SA nodal rates to ca. 100 to 110 beats\/min<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Quite the contrary. The ventricle beating at such a rate, under the impetus of regular stimuli from the SA node, spends so much of its time in either controlled contraction or in a refractory state, so to speak, that there is little opportunity for the slow inherent rhythmicity of the ventricle to be manifest.<\/p>\n<p>I\u2019d suggest that a look into your textbook of physiology might help clear up points such as those.<\/p>\n<p>Try another choice among those in Item XIII.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Hypercarbia<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Right. And any of a number of mechanisms, direct and indirect, have been suggested as accounting for the association of hypercarbia and ventricular arrhythmias. The association was apparent particularly in deep cyclopropane anesthesia: respiratory depression produced by the drug led to hypercarbia that was not accompanied by \u2013 or signalled by \u2013 the signs of hypoxia, since the concentration of oxygen in the inspired gas mixture (70-80%, or more) was more than adequate even though tidal exchange was reduced.<\/p>\n<p>As for mechanism, try this one: Hypercarbia is associated with acidosis, and this leads to an increased concentration, locally at least, of ionized calcium. Calcium ions themselves decrease the SA rate; calcium ions (acting synergistically, additively, with the anesthetic agent in this case) also lead to slowed AV conduction. Under this combination of circumstance, the inherent rhythmicity of the ventricle can be manifest and ventricular arrhythmias are observed.<\/p>\n<p>During hypercarbia, both epinephrine and cellular potassium are released into the blood stream by mechanisms which are not entirely clear; these agents may play a role in inducing ventricular arrhythmias during hypercarbia as they do under other circumstance.<\/p>\n<p>Maybe your textbooks of pharmacology and physiology have more light to shed on this subject. By the way, regardless of their clinical usefulness, what drugs might facilitate production of ventricular arryhthmias during hypercarbia? Might militate against their occurrence?<\/p>\n<p>After a moment\u2019s thought on that, why don\u2019t you go on to Item XIV?<\/p>\n<p><\/div>\n<\/div>\n\n<p>XIV. Agents which appear to undergo substantial biotransformation under clinical conditions of use include:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Isoflurane and nitrous oxide, but not halothane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, it\u2019s really the other way around: halothane, but neither isoflurane nor nitrous oxide undergoes substantial biotransformation in the body. Might it be useful to review the relevant parts of your textbook?<\/p>\n<p>Back to Item XIV, I\u2019m afraid, and another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Halothane, but not nitrous oxide<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Perfectly correct. Halothane is one of the clinically useful general anesthetic agent \u2013 let\u2019s not debate the clinical role, if any, of ethanol \u2013 to undergo substantial biotransformation in the body. What are the names of the others?<\/p>\n<p>Some things, I fear, are facts to be learned: either there\u2019s no figuring them out from first principles, or reasoning them out is more trouble than just remembering!<\/p>\n<p>Now try Item XV.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Nitrous oxide, but not isoflurane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Too bad. Neither of these materials undergoes substantial biotransformation in the body. I suspect your memory on these points needs refreshing, by referring to your text.<\/p>\n<p>Back to Item XIV and another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Halothane, methoxyflurane and nitrous oxide<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>I\u2019m afraid you\u2019ve made a wrong choice. Not all of these undergo biotransformation to any degree in the body. I think you should refresh your memory on this topic by reference to your text, then,<\/p>\n<p>Back to Item XIV and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<p>XV. Diethyl ether has a prominent effect under conditions of clinical use, to stabilize the post- synaptic membrane at the skeletal neuromuscular junction. When used with adjuvants to clinical anesthesia, one would expect ether to act:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Synergistically with tubocurarine and antagonistically to at least some effects of succinylcholine<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Of course, you\u2019re perfectly correct. Tubocurarine, too, acts to stabilize the post-junctional membrane, but specifically to the stimulant effects of acetylcholine released from the pre-synaptic nerve terminal and competing with tubocurarine for the same receptors. Succinylcholine \u2013 true to its chemical nature \u2013 acts like acetylcholine at the neuromuscular junction and causes depolarization of the cell subsequent to the drug\u2019s combination with receptors in the post-junctional membrane. Hence, ether acts additively, synergistically, with tubocurarine, and antagonistically to succinylcholine.<\/p>\n<p>Under what circumstances might tubocurarine act synergistically with succinylcholine? Antagonistically?<\/p>\n<p>It\u2019s time to go on to Item XVI.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Antagonistically to tubocurarine<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Incorrect: Ether and tubocurarine act synergistically with each other ar the neuromuscular junction. Sorry, you\u2019ll have to go back to Item XV and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Antagonistically to tubocurarine and gallamine<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Stop! Ether acts synergistically with tubocurarine at the skeletal neuromuscular junction. Since gallamine has the same mode of action at that site as does tubocurarine, it follows that ether should act synergistically with gallamine. Indeed, it does. Back to Item XV, and try a different choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Antagonistically to gallamine, and synergistically with succinylcholine<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry; gallamine acts synergistically with ether at the neuromuscular junction. Since gallamine acts antagonistically to succinylcholine, at least when administration of gallamine precedes administration of succinylcholine, it seems reasonable to suspect that ether acts antagonistically to succinylcholine \u2013 at least to the manifestation of succinylcholine\u2019s intrinsic activity. And that\u2019s actually what happens!<\/p>\n<p>Back to Item XV and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<p>XVI. Respiratory arrest, as an effect of the anesthetic agent alone on the respiratory center, can be produced without anoxia (when a gas &#8211; or vapor-oxygen mixture is used) by:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Nitrous oxide, and cyclopropane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Stop! Disregarding cyclopropane for the moment, nitrous oxide can\u2019t be used under these conditions to produce Stage IV anesthesia.<\/p>\n<p>Go back to Item XVI and please, try again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Cyclopropane, but not nitrous oxide<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>You are perfectly right. This problem has a solution that\u2019s a variation on our old theme of Pa = PsK, that the partial pressure of the gas or vapor required to produce <a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#Anesthetic\">anesthesia<\/a> is proportional to the vapor pressure of the material (see Question IV). A similar relationship applies when effects other than anesthesia are under consideration. For production of anesthesia, the proportionality constant is about 0.05, for all agents; for production of Stage IV anesthesia \u2013 respiratory arrest from the agent alone \u2013 the proportionality constant is about 0.12. The vapor pressures of nitrous oxide is so great that the partial pressure predicted (from the product of vapor pressure and 0.12) to cause respiratory arrest is greater than 760 mmHg: at atmospheric pressure, there\u2019s no room in the inspired gas mixture for both the requisite amount of drug and sufficient oxygen to prevent anoxia. Of course, one could always give anesthesia with this agent under hyperbaric conditions\u2026 if one wanted to produce Stage IV anesthesia! The \u201csafety\u201d of nitrous oxide, under the usual conditions of drug administration, is at least in part an inevitable consequence of its low boiling point and high vapor pressure. Cyclopropane doesn\u2019t qualify, physicochemically speaking; its vapor pressure \u2013 although it is a gas at standard temperature and pressure \u2013 is low, as gases go, and cyclopropane, in the presence of a concentration of oxygen adequate to prevent anoxia, can readily produce Stage IV anesthesia.<\/p>\n<p>Remember that many inert gases, such as xenon, for example, can produce anesthesia from Stage I through Stage IV when given under hyperbaric conditions. SCUBA divers recognized this, too, after unfortunate accidents resulted from breathing the inert gas nitrogen under conditions of high partial pressures.<\/p>\n<p>Observe, that if P1 is the partial pressure of gas required to produce Stage IV anesthesia, a lethal effect, P1\/Pa is a sort of &#8220;<a href=\"https:\/\/www.bumc.bu.edu\/ppb\/resources-2\/glossary\/#TherapeuticIndex\">therapeutic index<\/a>&#8220;. Then P1\/Pa = .12 Ps\/.05 Ps for any agent; Ps \u201ccancels out\u201d, and we see that every anesthetic agent (i.e. regardless of its vapor pressure, fugacity, thermodynamic activity, or whatever) has a \u201ctherapeutic index\u201d of about 2.4. It happens to be true, experimentally, and seems likely to remain true for agents of this type.<\/p>\n<p>O.K., now on to Item XVII.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Halothane and ether, but not cyclopropane<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, all of these agents can produce respiratory arrest \u2013 i.e. Stage IV anesthesia \u2013 under the conditions given.<\/p>\n<p>Back to Item XVI and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Halothane and nitrous oxide<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, halothane will, but nitrous oxide cannot, produce respiratory arrest, \u2013 i.e. Stage IV anesthesia \u2013 under the conditions given.<\/p>\n<p>You\u2019ll have to go back to Item XVI and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<p>XVII. Other things being equal, post-operative nausea and vomiting would be more likely to occur following use of :<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Ether, than of nitrous oxide<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Right you are! Generally speaking post-operative nausea and vomiting occur when there is a relatively slow recovery from anesthesia, a relatively slow recovery of willful or involuntary control over vomiting mechanisms. I think we\u2019ve agreed recovery from ether tends to be slower than recovery from the equivalent degree of anesthesia produced by nitrous oxide; if we\u2019re not agreed to this, I suggest you review Item VIII. In addition, of course, ether is by far the more irritating to the mucous membranes of the oro-pharynx and the tracheo-bronchial tree and the gastrointestinal tract (all the anesthetic gases pass into the gas bubbles that always exist inside the gastrointestinal tract); these factors \u2013 in addition to its sometimes unpleasant smell \u2013 would contribute to vomiting following ether, but not nitrous oxide, anesthesia.<\/p>\n<p>Good, go on to Item XIII.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Nitrous oxide, than of ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, wrong choice; but before you go back to Item XVII to choose again, I suggest you review Item VIII.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Cyclopropane, than of ether<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Too bad, wrong choice. Before going back to Item XVII to make another choice, why don\u2019t you review Item VIII; I think it might help.<\/p>\n<p><\/div>\n<\/div>\n\n<p>XVIII. In analogy with known anesthetic agents, adverse effects of MF, TF, and BF that might be anticipated during experimental anesthesia would include:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Lowered diastolic blood pressure consequent to ganglionic blockade<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>True enough; why don\u2019t you make an additional choice or two from Item XVIII?<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Lowered systolic blood pressure consequent to a negative inotropic effect<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Absolutely true; now would you like to make an additional choice or two from Item XVIII?<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Lowered systolic blood pressure consequent to central respiratory depression and both central and peripheral skeletal muscle relaxation<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good and very true. Wouldn\u2019t you like to go back to Item XVIII and see if there are any more true answers?<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Only two of the above<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>No. Are you really satisfied that only two of these effects would be produced by the mechanisms suggested? Go back to Item XVIII and be adventurous and daring: Try choice e.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">e. a, b, and c above<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very good; all these effects would be produced by the mechanisms suggested and would be observed during the course of deep clinical anesthesia.<\/p>\n<p>Carry on, and try Item XIX<\/p>\n<p><\/div>\n<\/div>\n\n<p>XIX. Preanesthetic medication with conventional doses of atropine (ca. 0.5-1.0mg, s.c. or i.m.):<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Markedly reduces the amount of thiopental sodium required to induce anesthesia<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, unlike scopolamine, atropine has negligible central nervous system depressant effects in doses such as those described. Certainly, any such effects are of a kind and severity that do not permit or require reduction in the \u201cinduction dose\u201d of thiopental. Should you review the pharmacology of atropine?<\/p>\n<p>Go back to Item XIX and make another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. Interferes with detection of very deep anesthesia by preventing pupillodilation<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Wrong choice, I fear. Atropine might produce pupillodilation by blocking the effects of the parasympathetic nervous system on the circular muscles of the iris, but probably not in this low dose. The pupillodilation seen in deep anesthesia is the result of both a \u201cneurogenic\u201d effect and the effect of the agent on the muscles of the iris themselves; it\u2019s like the pupillodilation of a completely denervated eye. It\u2019s not prevented by atropine, and is, ultimately, more intense than that produced by even maximally effective doses of atropine. Hence, atropine won\u2019t interfere with detecting the ocular signs of deep anesthesia. Obviously other signs of deep anesthesia \u2013 and its consequences \u2013 are of more clinical importance than eye signs such as pupillodilation.<\/p>\n<p>Go back to Item XIX and choose again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. Provides effective protection against vagal reflexes evoked by, e.g., sudden severe traction on viscera<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Sorry, atropine provides protection against some of the vagal reflexes that occur during anesthesia, but doesn\u2019t protect much against such severe and biologically significant stimuli as traction on the viscera.<\/p>\n<p>Might it be useful to review the pharmacology of atropine?<\/p>\n<p>Go back to Item XIX and try another choice.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Decreases salivary and respiratory tract secretions that might otherwise interfere with ventilation<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Very true; the perfect choice<\/p>\n<p>Go on to Item XX<\/p>\n<p><\/div>\n<\/div>\n\n<p>XX. Just for fun, which of the sets of associations below is correct:<\/p>\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">a. Linus Pauling - the hydrate microcrystal theory of general anesthesia<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Correct; Pauling is responsible for originating the theory. See Science 134: 15, 1961 and Anesth. and Analges. 43: 1, 1964.<\/p>\n<p>Might not another choice or two be correct as well? Go back to Item XX and try again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">b. John Snow - cholera-chloroform<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Correct, when he wasn\u2019t studying the epidemiology of cholera or taking the handle from the Broad Street pump, Snow was busy being, probably, the first professional anesthesiologist; Queen Victoria used his services during several of her obstetrical deliveries.<\/p>\n<p>Incidentally, Benjamin Ward Richardson (Richardson\u2019s Law: anesthetic potencies of aliphatic alcohols are inversely related to their water solubilities) also combined an interest in anesthesiology with an interest in epidemiology! Do you think this is anything more than coincidence?<\/p>\n<p>You might be interested in Keys, T. E., The History of Surgical Anesthesia, Dover Publications, 1963.<\/p>\n<p>But might one or another choice also be correct?<\/p>\n<p>Go back to Item XX and have another try.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">c. W.T.G. Morton - ether - Boston<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Of course, the first successful public demonstration of surgical anesthesia is summarized by the triad of Morton-Ether-Boston. But might another choice be equally correct?<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">d. Cyclopropane - Madison, Wisconsin; Ethylene - Chicago; Trichloroethylene - Cincinnati<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Perfectly correct; not every \u201cfirst\u201d in anesthesiology happened in Boston. Might another choice be equally correct?<\/p>\n<p>Go back to Item XX and choose again.<\/p>\n<p><\/div>\n<\/div>\n\n<div class=\"bu_collapsible_container \" aria-live=\"polite\" data-customize-animation=\"false\"><h4 class=\"bu_collapsible\" aria-expanded=\"false\"tabindex=\"0\" role=\"button\">e. All of the above<\/h4><div class=\"bu_collapsible_section\" style=\"display: none;\"><\/p>\n<p>Completely correct at last! (Do read the comments for the other choices to Item XX\u2026 if you have not done so already)\u2026 and this is the end of the program.<\/p>\n<p><\/div>\n<\/div>\n\n","protected":false},"excerpt":{"rendered":"<p>Edward W. Pelikan, M.D. Professor Emeritus and Former Chairman of Pharmacology Boston University School of Medicine Questions or comments should be mailed to Carol Walsh Return to Pharmacology Problem Sets This is a program about anesthetic agents and their properties. It is also concerned with a class of agents capable of producing central nervous system [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":69,"menu_order":3,"comment_status":"closed","ping_status":"closed","template":"page-templates\/no-sidebars.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/pages\/77"}],"collection":[{"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/comments?post=77"}],"version-history":[{"count":33,"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/pages\/77\/revisions"}],"predecessor-version":[{"id":18794,"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/pages\/77\/revisions\/18794"}],"up":[{"embeddable":true,"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/pages\/69"}],"wp:attachment":[{"href":"https:\/\/www.bumc.bu.edu\/ppb\/wp-json\/wp\/v2\/media?parent=77"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}